20+ Years Experience

Professionals you can trust on

Contact Us

Get a FREE quote today!

0478 817 718

Get in touch with us today!

Concrete Cutting Cost Melbourne
A concrete cutting job in Melbourne generally lands between $20 and $400 per linear metre, and the final price depends almost entirely on saw type, slab thickness, reinforcement, and site access. A concrete cut can’t be undone. Get it wrong and the whole site loses time, services get hit, slabs crack, and costs climb. That’s the standard every job gets held to, whether it’s a school with students on site, a trading shopping centre, or a builder opening a wall on a tight program.

What Does Concrete Cutting Cost In Melbourne

Melbourne Concrete Cutters has been cutting concrete across Melbourne for 20+ years, on 1,000+ residential, commercial and industrial projects, fully licensed, insured and WorkSafe compliant. That experience is exactly why we don’t hand out a flat per-metre rate over the phone. A domestic plumbing core hole and a commercial saw cut across a 300mm reinforced floor are not priced anywhere near each other, and a site-assessed quote beats a phone estimate every time.
Depth Sets The Price

Cost Per Linear Metre By Cut Depth

Depth is the first thing that moves the number. Across the Melbourne and Victorian concrete cutting market, published pricing guides generally show the ranges below. These are typical Melbourne-market ranges, not a fixed rate for every job. A thicker slab takes longer to cut, wears through more diamond blade, and often needs a bigger saw, before reinforcement, access, or site conditions are even factored in.
Cut Depth Typical Price Per Linear Metre
Shallow cuts (up to 100mm) Around $15 to $40
Mid-depth cuts (100mm to 200mm) Roughly $25 to $60
Deep cuts (over 200mm to 300mm) Commonly $60 to $100+, rising further where reinforcement is heavy

Handheld Saw Vs Walk-Behind Floor Saw Pricing

hand saw cutting
Right Saw, Right Job
A handheld saw and a walk-behind floor saw solve different problems, and the pricing reflects that. Handheld sawing suits small jobs, tight corners and short runs, control joints, expansion lines, a single trench cut, where setting up a bigger rig would cost more than it saves. A walk-behind floor saw is the workhorse for driveways, slabs and full carriageways cut to depth with a track-mounted rig, and it’s generally the more cost-efficient choice per metre once a job runs past a few metres of cutting. Choosing the wrong saw for the job is one of the most common reasons a concrete cutting job in Melbourne runs late and over budget. Booking the right equipment from the start, confirmed against diameter, depth and access, is part of what a proper quote should nail down before the crew turns up.

Wall Sawing And Wire Sawing Cost Ranges

Wall sawing and wire sawing sit at the top end of the per-metre range, and for good reason. Wall sawing (wall cutting) opens structural walls for doorways, windows and services, and typically runs from around $80 to $200 per linear metre. Behind an older Melbourne wall there’s often a pipe, a cable or a vent nobody marked on the plans, so wall sawing works around what’s actually on site, not what the drawings claim. This is the service behind flagship jobs like Lowther Hall Anglican Grammar School, Karingal Hub Shopping Centre and the BYD dealership fit-out in Kew. Wire sawing is the specialist end of the trade, used on bridge decks, post-tensioned slabs and mass concrete where a blade simply can’t reach. Pricing commonly sits between $150 and $400 per linear metre, reflecting the equipment, the skill and the low-volume, high-ticket nature of the work.

Wall Sawing

Around $80 to $200 per linear metre for structural openings.

Wire Sawing

Commonly $150 to $400 per linear metre for specialist heavy concrete.

What Drives The Price Up On A Cutting Job

Four factors do most of the work in any concrete cutting quote. A stairwell too tight for a track saw calls for hand saw cutting, and a pipe near a wall needs a ring saw where a floor saw can’t reach. Ring saw cutting reaches up to around 300mm, deep and awkward cuts other equipment can’t touch, and that reach comes at a cost premium over a standard floor saw pass.

Saw Type

Track, wall, hand, ring or core rig.

Slab Thickness

Depth drives time and equipment choice.

Reinforcement

Rebar and mesh change the cutting plan.

Site Access

Plus slurry management on certain jobs.

Reinforcement, Access And Site Conditions

Reinforcement is the single biggest variable inside “what does the concrete actually contain.” Rebar and mesh slow the cut, wear blades faster, and sometimes call for a different saw altogether. Core drilling in Melbourne starts with knowing what’s behind the slab: reinforcement, conduit, and sometimes a live cable. Miss it, and a clean cut becomes a repair. Access adds its own cost. A driveway with clear vehicle access is a different job to a laneway, a lift, or a loading dock that rules out standard equipment. Slurry management, keeping wet-cutting run-off contained and disposed of properly, adds further cost on certain jobs, particularly in occupied or trading commercial sites where a mess simply isn’t an option.
Quote Process

Why A Site Assessed Quote Beats A Phone Estimate

Every Melbourne site gets walked before quoting, because plans rarely match what’s actually built. That site assessment is what turns a rough figure into a real quote, not a placeholder figure worked out over the phone. Booking the wrong saw off a phone estimate is the most common reason a concrete cutting job in Melbourne runs late. Confirming the scope on site first is what stops that happening.

Site Assessment

Every site walked before quoting, checking for anything the drawings missed.

Quote & Scheduling

Diameter, depth and access confirmed first, then a real quote goes out.

Cutting, Clean-Up & Handover

Wet cutting and dust extraction, slurry cleared, site handed back clean.

Same Day And Emergency Cutting Costs

Concrete Cutting
Short Notice
A drain that needs coring before an inspection, a doorway holding up a pour, same-day cutting comes up regularly on Melbourne sites. Whether it’s possible on a given day depends on the schedule and the job, and same-day or after-hours work commonly carries a loading on top of the standard rate, since it means moving a crew and equipment at short notice. A call with the site details gets a straight answer on timing and cost rather than a guess.
Not An Optional Extra

Wet Cutting, Dust Control, And Silica Compliance

Wet cutting and dust extraction aren’t optional extras; they’re what keeps WorkSafe Victoria’s silica limits in check on every job. WorkSafe Victoria’s exposure limit for respirable crystalline silica sits at 0.05mg/m³, and dry cutting without water suppression or extraction on a live site breaches that threshold quickly. Water supply, dust extraction gear and slurry containment all form part of a properly scoped quote, and they matter more, not less, on an occupied commercial site where dust complaints and safety non-compliance carry real consequences.

Concrete Cutting Cost Across Melbourne Suburbs

Location affects a quote mostly through access and travel, not through a different base rate. Inner and bayside Melbourne suburbs, where laneways, lifts and tight parking are common, tend to price toward the higher end of the range compared with outer-suburb and growth-corridor sites with straightforward access. Melbourne Concrete Cutters services Melbourne metro end to end, plus regional Victoria including Geelong and Bendigo, from inner-city fit-outs to outer-suburb civil work, with the same crew and the same standard applying everywhere.

What Is Included In A Proper Written Quote

A proper concrete cutting quote should set out the saw type, the confirmed depth and diameter, access requirements, reinforcement allowance, slurry and dust management, and a clear scope of what’s included versus what would trigger a variation, such as an unmarked service hit mid-cut, for example. That clarity is what stops a quote turning into a dispute once cutting starts.

Booking A Commercial Cut Around A Live Site Program

Commercial concrete cutting in Melbourne means working around other trades and a program that won’t move. Cuts get planned to fit the schedule, not disrupt it, on live and occupied sites, schools, trading centres and program-driven builds. Arrival times and access get confirmed ahead of time so a tight build doesn’t stall waiting on the cutting crew.
concrete cutting

Get A Real Quote, Not A Placeholder Figure

Send through the site details, access, depth and what’s being cut, and a specialist will confirm what the job actually needs before a number goes out.
Call 0478 817 718